Custom Steel Fabrication in Pierce County
What Local Contractors, Farmers, and Builders Actually Need
If you've spent any time trying to source custom metal work in South Pierce County, you already know the problem. The big shops in Tacoma want big contracts. The one-man operations are booked out, unreachable, or both. And the shops up in Seattle might as well be in another state by the time you factor in hauling time and fuel.
A&J Custom Metals sits in Graham, WA, right in the middle of the South Pierce corridor and we built this shop specifically for the people who get left behind by that system: the general contractor who needs structural brackets on Thursday, the farmer whose feeder busted over the weekend, the landscaper who needs a custom gate to close out a job. Real work, real timelines, done by people who know the trade.
Here's a breakdown of what we build, how we build it, and why it matters that we're local.
Structural Fabrication for General Contractors and Builders
The ADU and custom home market in Pierce County has exploded over the last few years. Permits are up, framers are busy, and GCs are running tighter schedules than ever. When a framing crew needs custom post bases, beam seats, or stair stringers, waiting two weeks at a large shop isn't a schedule option, it's a blown deadline.
At A&J, we work directly with general contractors and framers on structural steel components. That means:
Post bases and anchor hardware - custom dimensions to match your structural engineer's spec, welded from A36 or equivalent mild steel
Beam seats and column caps- built to carry the load, cut and fit with precision
Stair stringers - custom rise/run to your layout, prepped for treads
Custom brackets and connectors - one-off fabrication for situations where off-the-shelf hardware doesn't exist
When you bring us a drawing or even a rough sketch with dimensions, we can get a quote back to you fast. Clean drawings get fast turnarounds. If you're a GC running multiple jobs, ask about setting up a trade account for repeat work.
Agricultural Fabrication and Equipment Repair
South Pierce County, from Graham down through Eatonville, Orting, and Roy is farming and ranch country. Hobby farms, horse properties, hay operations, and small livestock setups are everywhere. And the equipment that keeps those properties running doesn't care what day of the week it is when it breaks.
That's where local matters. When a gate hinge shears, a feeder frame cracks, or a livestock panel gets bent by a bull at 6am on a Saturday, you don't need a shop 30 miles away with a two-week queue. You need someone close who can look at it, tell you straight what it takes, and get it handled.
We build and repair:
Hay feeders and bale rings - heavy gauge steel, welded to take abuse, not sheet metal decorations
Livestock panels and corral components - built to your pen dimensions
Gate hardware and hinges - fabricated to handle actual weight and actual use
Equipment and implement repairs - broken frames, cracked mounts, worn components on tractors, trailers, and attachments
We're not afraid of dirty equipment. Bring it in.
Trailer Builds and Repairs
Trailers take a beating in this part of Washington. Contractors haul equipment over rough job sites. Farmers drag loaded hay trailers across wet ground. Off-road guys push their rigs harder than they should. Eventually, something gives.
We build custom trailers from scratch and repair what's already in your fleet. On new builds, we use A36 structural steel for frames and tube steel for tongue and cross members, sized to the load you're actually hauling - not just whatever fits the design file. Welds are full-penetration where it counts, and gussets go in the right places, not just where they look good.
Common trailer work we handle:
Utility flatbeds - 10 to 20 foot, single or tandem axle, with or without stake pockets and ramps
Equipment haulers - built to your GVW requirements
Custom configurations - dove tails, tilt beds, pipe toppers, toolbox mounts
Repairs - cracked welds, bent frames, tongue repairs, coupler replacement, floor replacement
If you've got a trailer that's out of service, bring it in. We'll tell you straight whether it's worth repairing or time to build new.
Custom Truck Accessories
Pierce County is truck country. Work trucks, off-road rigs, and overland builds are everywhere, and the aftermarket accessory world is full of options, most of them stamped overseas from thin material. If you've bought a bolt-on bumper that bent the first time you used it, you know exactly what we're talking about.
We build custom steel truck accessories in-shop, to your truck and your use case:
Front and rear bumpers - built from 3/16" or 1/4" steel plate, with receiver tubes, D-ring mounts, and skid plate options
Headache racks - steel tube construction, sized to your cab and bed length
Bed rails and stake side systems - for contractors who need to actually carry material
Skid plates and underbody protection - for the guys who go off road and mean it
Toolbox mounts and utility frames - custom-fitted to your truck and your gear
The process is straightforward: come in with your truck, tell us what you're trying to do with it, and we'll build around the actual vehicle. Nothing gets test-fit on a different year or a different trim level.
Emergency Welding - When It Can't Wait
Equipment breaks on its own schedule. A bucket pin cracks the morning of a pour. A trailer tongue splits on the way to the job. A gate comes off the hinge the night before a livestock delivery. These aren't situations where you can wait in line.
We handle emergency welding work in-shop. If you've got a critical repair that needs to happen fast, call us. We'll give you a straight answer on whether we can get you in, what it takes, and what it costs. We don't pad the price because you're in a jam - we give you what it is and get it done.
The most important thing you can do is call before you show up. Tell us what you've got, what it is, and when you need it. We'll work from there.
Why Graham, WA Is the Right Location
Graham sits at the center of a service area that includes Puyallup, Spanaway, Eatonville, Orting, Buckley, Roy, and McKenna. We're close to the customers who need fabrication most, the ones who can't spend half a day driving to a shop in Tacoma and back.
Being local means faster quotes, easier drop-offs, and the ability to come in, look at a project together, and get it right the first time. We're not routing your job through a sales rep or putting you in a customer queue. You talk to the people doing the work.
What to Bring When You Come In
The more information you bring, the faster we can get you a quote.
Drawings or sketches - even rough hand-drawn dimensions help
Material preferences - mild steel, stainless, aluminum if applicable
The actual piece - for repairs, bring it in so we can look at it
Your timeline - tell us when you need it and we'll tell you if we can hit it
No project is too small. We don't have minimum order requirements for custom work.
Get a Quote from A&J Custom Metals
If you're in South Pierce County and you need metal work done right, we're here. Custom fabrication, structural steel, trailer builds, truck accessories, ag equipment repair, and emergency welding all in-shop, all done by people who know the trade.
Call us, come by the shop, or send us a message with your project details. We'll get back to you fast with a straight answer on price and timeline.
A&J Custom Metals - Graham, WA Built for the people who actually work for a living.
